FAQ | Alpha Surveying

+86-20-82108930

info@alpha-surveying.com

HOME

ABOUT US

PRODUCTS

NEW & EVENTS

SERVICE & SUPPORT

[ 5i GNSS ] Requirements of the place you set up the base of 5i GNSS：

a. Cut-off angle larger than 15 degrees; Open area without large obstructions.

b. No electromagnetic interference(No microwave stations, radar stations, or cell phone tower within 200 meters; And no power lines within 50 meters.)

c. Base station should be set up in higher places. There should be no large obstructions between the base and the rover or the differential data transmission distance would be shorter.

*Normally, it is recommended to set up the base stations in open areas or on the top of high buildings

[ 5i GNSS ] Data Exporting of 5i GNSS

When the measuring work is finished, the results can be exported in the format that caters to the needs of the surveyor by clicking [project]-[data export]. The export process is as follows.

a. Connecting the controller to a computer by Type-C cable. Set USB computer connection to MTP mode.The computer will read the U disk mode in the controller, open and copy the recorded results on the computer. Note: Users need to export the results from the app to the controller before connecting the controller to a computer by USB.

b. When the recorded results have been exported to the controller, a share prompt will show up for users to send the results to a computer by wireless methods through WeChat, QQ, or Bluetooth

[Ti Total Station ] Setting up the tripod and instrument of Ti total statio

When the measuring work is finished, the results can be exported in the format that caters to the needs of the surveyor by clicking [project]-[data export]. The export process is as follows.

b. When the recorded results have been exported to the controller, a share prompt will show up for users to send the results to a computer by wireless methods through WeChat, QQ, or Bluetooth